Friday 27 May 2011

GEKA Model 80/A

GEKA Model 80/A

GEKA Model 80/A

Universal Hydraulic Iron Worker

Ref #: TBA
Capacity: 80 Ton
90° Angle: 130 x 130 x 13 mm
Cropping: 450 x 15 mm
Round & Square Section: 45 mm
Punching: 40 Ø x 14 mm
£8,950.00 + VAT (ex. works)

11 1/2" x 6" T-slotted sine table.

11 1/2

11 1/2" x 6" T-slotted sine table.

CHELMSFORD

Ref #: 0593
Centre of rollers 10" x 5"
Adjustable side and back stops.
Overall height: Approx 5 1/2"

Excellent condition.

SERIAL No: 2118
Made in england.
£775.00 + VAT (ex. works)

1/4" 6.3mm Capacity bench type cropper/ shears.

1/4

1/4" 6.3mm Capacity bench type cropper/ shears.

KEETONA

Ref #: 0592
Model K3
Capacity: Sheets 3/16" (4.8mm)
Strips 1/4" (6.3mm)
Round 1/2" (12.7mm)

Maximum cutting length: 140mm

Made in England.
£140.00 + VAT (ex. works)

12" Horizontal/ vertical rotary table.

12

12" Horizontal/ vertical rotary table.

WAEF

Ref #: 0591
12" diameter
4 x T-slotts
Disengagable feed for freehand turning.

Horizontal centre height: Approx 7.1/2"
Overall height horizontal: Approx 14.1/2"
Overall height vertical: Approx 4"

Made in England.
£425.00 + VAT (ex. works)

150mm/6" Bench vice.

150mm/6

150mm/6" Bench vice.

SEALEY

Ref #: 0590
150mm/6" Jaws
6" maximum capacity
125x 125mm surface plate.
£65.00 + VAT (ex. works)

24 Slot horizontal/ vertical indexing chuck.

24 Slot horizontal/ vertical indexing chuck.

24 Slot horizontal/ vertical indexing chuck.

PRATT BURNERD

Ref #: 0589
24 Slot indexing horizontal and vertical
200mm dia 3 jaw chuck with 55mm internal bore.
Unit through bore: 50mm/2"
Approx centre height when horizontal: 115mm/4 1/2"
Approx overall height to top of jaws when vertical: 200mm/8"
£415.00 + VAT (ex. works)

24 Slot horizontal/vertical indexing chuck.

24 Slot horizontal/vertical indexing chuck.

24 Slot horizontal/vertical indexing chuck.

MARLCO

Ref #: 0588
24 slot indexing
Horizontal & Vertical
5.1/4" 3 jaw chuck with 1.1/2" internal bore
Approx: 5" centre height when horizontal
Approx: 7" overall height to top of jaws when vertical
Dual lock, complete with chuck key.
£345.00 + VAT (ex. works)

400-500mm Adjustable external micrometer.

400-500mm Adjustable external micrometer.

400-500mm Adjustable external micrometer.

MITUTOYO

Ref #: 0587
Type No: 1004-143
Accurate to 0.01mm
Excellent condition

SERIAL No: 4002721
£245.00 + VAT (ex. works)

HARDINGE HLV-H

HARDINGE HLV-H

HARDINGE HLV-H

Toolroom Lathe

Ref #: TBA
Swing Over Bed: 11"
Swing Over Carriage: 9"
Swing Over Cross Slide: 6"
Distance Between Centres: 18"
Hole Through Spindle: 1¼"
Spindle Nose: 5C Hardinge
Thread Changes in Gear Box: 27 off
Spindle Speeds: 125-3000 rpm (variable)

Equipment:
3 & 4 Jaw Chucks
Micrometer Bed Stop
Quick Change Tool Post & 4 Holders
5C Collects & Centres etc
£3,950.00 + VAT (ex. works)

125-150mm External Micrometer.

125-150mm External Micrometer.

125-150mm External Micrometer.

STARRETT

Ref #: 0540
Type No: 436m
£50.00 + VAT (ex. works)

Set of 6 Metric external micrometers 0-150mm

Set of 6 Metric external micrometers 0-150mm

Set of 6 Metric external micrometers 0-150mm

LINEAR

Ref #: 553
Complete set including spacers and spanners.
Accurate to 0.01mm.
£195.00 + VAT (ex. works)

200mm High Precision Tilting Rotary Table

200mm High Precision Tilting Rotary Table

200mm High Precision Tilting Rotary Table

HAUSER

Ref #: 0586
200mm diameter
195mm overall verticle height
Approx. 125mm centre height
265mm overall horizontal height

250mm wide x 270mm deep base

Holds SCHAUBLIN type-w-20 collets
Includes collets: 8mm, 3/16",1/4",5/6",3/8",7/16" and 1/2"
Collet arbor is missing- contact seller for details

Comes with 2x adjustable edge levels

Made in Switzerland
£625.00 + VAT (ex. works)

VDI 30 3 Morse Taper Tool Holder

VDI 30 3 Morse Taper Tool Holder

VDI 30 3 Morse Taper Tool Holder

ZURN

Ref #: 0585
30.03.200
F30-MK-DK3 H
DIN 69880
£50.00 + VAT (ex. works)

No.1 Tapper with No.10 tapping chuck

No.1 Tapper with No.10 tapping chuck

No.1 Tapper with No.10 tapping chuck

ARCHER

Ref #: 0584
1 Morse taper
Complete set of equipment
Automatic reverse
Friction drive

Made in England
£160.00 + VAT (ex. works)

12" Slimline T-slotted Rotary table

12

12" Slimline T-slotted Rotary table

Taylor-Hobson

Ref #: 0583
12" Diameter
4x T-Slotts

Slimline with 3.5" overall height
Disengagable feed for freehand turning
Accurate to 1/60th of a degree

Excellent condition

Made in England
£475.00 + VAT (ex. works)

150mm-300mm Adjustable external micrometer.

150mm-300mm Adjustable external micrometer.

150mm-300mm Adjustable external micrometer.

Mitutoyo

Ref #: 0582
Complete set.
Excellent condition.
£230.00 + VAT (ex. works)

24"/ 600mm Vernier caliper with fine adjustment.

24

24"/ 600mm Vernier caliper with fine adjustment.

Ref #: 0581
1.1/2"/63.5mm jaw depth.
£60.00 + VAT (ex. works)

6"/150mm Clock gauge vernier caliper.

6

6"/150mm Clock gauge vernier caliper.

Mitutoyo

Ref #: 0580
Accurate to .001"
£25.00 + VAT (ex. works)

Internal bore gauge 1.3/4" to 12.3/4"

Internal bore gauge 1.3/4

Internal bore gauge 1.3/4" to 12.3/4"

Baty

Ref #: 0579
3 extension pieces: 2", 3" & 4"
1/4" travel.
Accurate to 0.0001"

Made in England.
£160.00 + VAT (ex. works)

4.1/2" Whit thread/ snap gauge

4.1/2

4.1/2" Whit thread/ snap gauge

Horstmann

Ref #: 0578
4.1/2" x 14
Whitworth
GEN PD 4.4543"

Made in England.
£80.00 + VAT (ex. works)

1.1/8" Whit thread/snap gauge

1.1/8

1.1/8" Whit thread/snap gauge

Horstmann

Ref #: 0577
1.1/8" x 20
Whitworth
RH & LH
£50.00 + VAT (ex. works)

3/4" UNC Thread/ snap gauge

3/4

3/4" UNC Thread/ snap gauge

Horstmann

Ref #: 0576
3/4"-10
UNC 2A
RH & LH
£40.00 + VAT (ex. works)

5/8" UNC Thread/ sanp gauge

5/8

5/8" UNC Thread/ sanp gauge

Horstmann

Ref #: 0575
5/8"-11
UNC 2A
RH & LH
£40.00 + VAT (ex. works)

3/4" UNF Thread/ snap gauge

3/4

3/4" UNF Thread/ snap gauge

Horstmann

Ref #: 0574
3/4"-16
UNF 2A
RH & LH
£40.00 + VAT (ex. works)

1/2" BSP.F Thread/ snap gauge

1/2

1/2" BSP.F Thread/ snap gauge

Horstmann

Ref #: 0573
1/2" BSP.F
GEN MED
RH & LH
£40.00 + VAT (ex. works)

3/8" BSP.F Thread/snap gauge

3/8

3/8" BSP.F Thread/snap gauge

Horstmann

Ref #: 0572
3/8" BSP.F
GEN MED
RH & LH
£40.00 + VAT (ex. works)

3/8" UNF thread/snap gauge.

3/8

3/8" UNF thread/snap gauge.

Horstmann

Ref #: 0571
3/8"-24
UNF 2A
RH & LH
£40.00 + VAT (ex. works)

COLUMBO Model BS2104

COLUMBO Model BS2104

COLUMBO Model BS2104

Heavy Duty Hydraulic Hacksaw

Ref #: 2089
Capacity: 230 mm
Blade Size: 18"

Two Speed
Hydraulic Down Feed
Swivel Vice
Coolant Pump
Emergency Stop Buttons

Year of Manufacture: 1980
£1,250.00 + VAT (ex. works)

SILOMA Type OL 261 M

SILOMA Type OL 261 M

SILOMA Type OL 261 M

Automatic Horizontal Bandsaw

Ref #: 2073
Capacity: 260 mm
Roller Type Feed

Year: 2005
£2,950.00 + VAT (ex. works)

BIGSTONE Type CF-350 AM

BIGSTONE Type CF-350 AM

BIGSTONE Type CF-350 AM

Swivel Bow Mitreing Automatic Horizontal Bandsaw

Ref #: 2330
Capacity: 350 mm (13¾")
£3,950.00 + VAT (ex. works)

WEBSTER & BENNETT M Type

WEBSTER & BENNETT M Type

WEBSTER & BENNETT M Type

Vertical Boring Machine

Ref #: 2333
Table Size: 48"
Max Swing: 61"
Max Distance Table to Underside of Rail: 24"
Speeds: 6.3 to 140 RPM
Motor: 22 kW
£18,000.00 + VAT (ex. works)

STARTRITE Model 352

STARTRITE Model 352

STARTRITE Model 352

Vertical Bandsaw

Ref #: 2027
45° Tilting Table

Table Size: 450 x 450 mm
Throat Size: 350 mm
Max Height (under guides): 260 mm
Blade Speeds: 1800 & 4000 ft/min
Single Phase: 240 V
Motor: 750 W
£525.00 + VAT (ex. works)

STECO Type A

STECO Type A

STECO Type A

Pyramid Power Rolls

Ref #: 1971
Capacity:
- Top Roll: 8" Ø
- Bottom Roll: 7" Ø

Length: 72"

Motor: 7.5 HP
£4,250.00 + VAT (ex. works)

TYPHOON Type O-HBC-1

TYPHOON Type O-HBC-1

TYPHOON Type O-HBC-1

Blast Cabinet

Ref #: 2317
Internal Size: 900 x 650 x 600 mm
£1,650.00 + VAT (ex. works)

200mm x 140mm precision bench centres

200mm x 140mm precision bench centres

200mm x 140mm precision bench centres

Verdict

Ref #: 0570
200mm maximum distance between points.
140mm maximum diameter.
Paralell points/feet on all sides so can be stood vertically and horizontally on all faces.
Can also be used in conjunction with sign blocks.
£245.00 + VAT (ex. works)