Wednesday 29 February 2012

HERBERT 4 Spindle Drill

HERBERT 4 Spindle Drill

HERBERT 4 Spindle Drill

V Type

Ref #: 2407
Table: 46" x 24"
Throat: 13"
Speeds (1 Spindle): 74 to 1455 RPM
Speeds (3 Spindles): 106 to 1455 RPM
Spindle Tapers: All 3 Morse
£2,950.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

Rotary Parts Deburing Machine

Rotary Parts Deburing Machine

Rotary Parts Deburing Machine

36" Diameter

Ref #: TBA
Comes with Phase Converter to single phase
£1,500.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

CEBORA

CEBORA

CEBORA

Spot Welder

Ref #: 1515
15 KVA
Throat: 16"
£750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

WARD 3DB

WARD 3DB

WARD 3DB

Capstan Lathe

Ref #: 2202
Collet Chuck to suit 403 collets
Bar Feed
Turret Tooling

Dual Dials
Power Cross Feed
£4,750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

DEAN SMITH & GRACE Type 25 x 120

DEAN SMITH & GRACE Type 25 x 120

DEAN SMITH & GRACE Type 25 x 120

Gap Bed Centre Lathe

Ref #: 2684
Swing Over Bed: 27" diameter.
Swing In Gap: 41" diameter.
Distance Between Centres: 120"
Spindle Bore: 4⅛"
Spindle Speeds: 11.3 to 930 rpm

Power Quick Traverse to Saddle
24 inch Four Jaw Chuck.
Rear Splash Guards (No photos).
£18,750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

AMADA Promecam Model APX

AMADA Promecam Model APX

AMADA Promecam Model APX

Upstroking Hydraulic Press Brake

Ref #: TBA
Upstroking Hydraulic Press Brake with Operateur OP-X Control
Capacity: 2000mm x 50 Ton
Year: 1993
£17,000.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

AMADA Model M1232

AMADA Model M1232

AMADA Model M1232

Guillotine

Ref #: TBA
Capacity: 1200mm x 3.2mm, 75s.p.m
£4,750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

COLCHESTER BANTAM 1600

COLCHESTER BANTAM 1600

COLCHESTER BANTAM 1600

Centre Lathe

Ref #: 2559
Swing Over Bed: 11¼"
Swing Over Cross Slide: 7" Ø
Distance Between Centres: 20"
Spindle Bore: 1" Ø
Spindle Speeds: 36 to 1600 rpm
Taper in Tailstock: 3 Morse.
2 Speed Motor: 1 & 2 HP
£1,750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

EXCEL Type PKTM 380 VA

EXCEL Type PKTM 380 VA

EXCEL Type PKTM 380 VA

Turret Milling Machine

Ref #: 2644
Table: 54" x 10"
Spindle Taper: 40 ISO
Spindle Speeds: Variable
Spindle Motor: 5 HP (3.7 kW)
Poqer Feed in X Axis
Newall 2 Axis DRO
Coolant
LoVo Light

Year 2003
Super Condition
£5,750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

ELLIOT Type 5E

ELLIOT Type 5E

ELLIOT Type 5E

Single Spindle Pedestal Drill

Ref #: 2578A
Table: 30" x 22"
4 Morse Taper (2")
Throat: 13"
Speeds: 58 to 839 rpm
£1,500.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

IBARMIA Type 40-CA

IBARMIA Type 40-CA

IBARMIA Type 40-CA

Single Spindle Pillar Drill

Ref #: 2424
Table size: 20" x 20"
Throat depth: 16"
Spindle Taper: No.4 Morse
Drilling capacity: 2 inch
Spindle speeds: 71 - 1344 rpm
£1,800.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

LAPMASTER Model 36

LAPMASTER Model 36

LAPMASTER Model 36

Rotary Linisher

Ref #: 2693
Lapping Table: 36"
4 x 14¼" Seperation Rings
2 x Glass Flats
Lapmaster Lamp
Lots of Plastic Seperation Plates
Max 5 HP
3 Phase. 50 Cycles.

With hold downs.
£16,950.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

FOBCO 10/Eight

FOBCO 10/Eight

FOBCO 10/Eight

Pillar Drill

Ref #: 2608
Table (Rack & Pinion Rise/Fall): 18"x15"
Spindle: 3 Morse Taper (1")
Speeds: 51 - 2650 rpm
£1,600.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

POLLARD

POLLARD

POLLARD

Single Spindle Gearded Head Pedestal Drill

Ref #: 2602
Table: 15"x13"
Throat: 7½"
Spindle: 3 Morse Taper (1")
Speeds: 84-1465 RPM

With Forwards/Reverse Tapping
£1,850.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

MEGA-PROSAW Type BS-400 SA

MEGA-PROSAW Type BS-400 SA

MEGA-PROSAW Type BS-400 SA

Semi-Automatic Horizontal Bandsaw

Ref #: 2599
Semi-Automatic
Capacity: 400mm Diameter

Year: October 2008
£12,250.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

THOMAS Type SAR 330 SA G

THOMAS Type SAR 330 SA G

THOMAS Type SAR 330 SA G

Semi-Automatic Horizontal Bandsaw

Ref #: 2647
0-60 Degrees Rotating Bow
Semi-Automatic

Capacity:
330mm Round
330mm Square
500x300mm Rectangular

Year 1998
£7,750.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

MORGAN RUSHWORTH Type TRTS

MORGAN RUSHWORTH Type TRTS

MORGAN RUSHWORTH Type TRTS

Initial Pinch Powered Bending Rolls

Ref #: 2633
Cpacity: 1270 mm x 3.2 mm
Top Slip Roll
Year 1996
£3,250.00 + VAT (ex. works)
Posted by westpoint at 15:18
Categories:

EDWARDS TRUECUT DD

EDWARDS TRUECUT DD

EDWARDS TRUECUT DD

Power Guillotine

Ref #: 2300
Capacity: 2500 mm x 3.25 mm
Direct Drive
Manual Back Gauge
£5,750.00 + VAT (ex. works)
Posted by westpoint at 15:17
Categories:

PEARSON Hydraulic Brake Press

PEARSON Hydraulic Brake Press

PEARSON Hydraulic Brake Press

3000 mm x 70 Ton

Ref #: 2627
Cpacity: 3000 mm x 70 Ton
Hydraulic Down Stroke
With tooling & light guards

Ex Training School
Remanufactured by Pearson Production Systems 1997
£12,950.00 + VAT (ex. works)
Posted by westpoint at 15:16
Categories:

GADE Type CO-20/8

GADE Type CO-20/8

GADE Type CO-20/8

Powered Hydraulic Guillotine

Ref #: 2629
Capacity:
2000 mm x nominal 8 mm
2000 mm x nominal 10 mm

Power back gauge

Year 1997
£14,750.00 + VAT (ex. works)
Posted by westpoint at 15:16
Categories:

Wednesday 8 February 2012

160mm Horizontal Vertical Tilting Indexing Chuck

160mm Horizontal Vertical Tilting Indexing Chuck

160mm Horizontal Vertical Tilting Indexing Chuck

WALTER

Ref #: 0775
Type: EST 4
160mm (6¼") Diameter Walter 3 Jaw chuck with key
Horizontal & Vertical zero stops for accurate positioning
Full 90° Tilt
42mm (1⅝") interal bore
24 point indexing
Spring release and lockable pin
Vertical height approx: 265mm (10½")
Horizontal centre height approx: 125mm (5")

Made in Germany
£795.00 + VAT (ex. works)
Posted by westpoint at 11:04
Categories:

8" Machine Vice on Swivel Base

8

8" Machine Vice on Swivel Base

ABWOOD

Ref #: 0780
8" Jaws
8" Capacity
360° Swivel Base

Complete with handle
£325.00 + VAT (ex. works)
Posted by westpoint at 11:04
Categories:

8" Machine Vice

8

8" Machine Vice

Ref #: 0779
8" Jaws
6⅝" Capacity
2½" Jaw Depth

Complete with handle
£275.00 + VAT (ex. works)
Posted by westpoint at 11:04
Categories:

8" Heavy Duty Machine Vice

8

8" Heavy Duty Machine Vice

RUDOLPH

Ref #: 0778
8" Jaws
5½" Capacity
2½" Jaw Depth

Complete with handle
£425.00 + VAT (ex. works)
Posted by westpoint at 11:04
Categories:

Angular Wheel Forming Attachment - Type UX1351/5

Angular Wheel Forming Attachment - Type UX1351/5

Angular Wheel Forming Attachment - Type UX1351/5

JONES & SHIPMAN

Ref #: 0777
Type: UX1351/5

For use on a 7" centre height machines
Comes with diamond tip
Dual fixing positions
Can form angles from 0 to 90°
Complete with box & both clamping bolts
Fits most JONES & SHIPMAN Cylindrical grinding machines
£1,250.00 + VAT (ex. works)
Posted by westpoint at 11:04
Categories:

Wednesday 1 February 2012

JAESPA Model 260

JAESPA Model 260

JAESPA Model 260

Horizontal Bandsaw

Ref #: TBA
Capacity: 260mm Ø (10")
Blade Speed: 50-300 fpm (Variable)
Blade Length: 3560-3660 mm
Two Way Swivel Vice
Length Stop
Coolant System
2 Speed Motor
£1,700.00 + VAT (ex. works)
Posted by westpoint at 16:12
Categories:

PULLMAX P215

PULLMAX P215

PULLMAX P215

Nibbler

Ref #: TBA
Variable Speed
42" Throat
With circle cutting attachment
£1,500.00 + VAT (ex. works)
Posted by westpoint at 16:12
Categories:

HYDROVANE 43

HYDROVANE 43

HYDROVANE 43

Rotary Compressor

Ref #: TBA
39 CFM
Free air delivery: 18.4 litres (30 ft³/min)
Motor Size: 7 kW (Approx)
£750.00 + VAT (ex. works)
Posted by westpoint at 16:12
Categories:

FZ

FZ

FZ

Pattern Makers Linisher

Ref #: 8783
Tilting Table
Table Size: 600 mm x 650 mm
3 Phase Electrics
Comes with 8 Assorted Upstands from 12 mm to 47 mm
£850.00 + VAT (ex. works)
Posted by westpoint at 16:12
Categories:

MK2 Hydraulic DType Collet Chuck with D1+8 fitting

MK2 Hydraulic DType Collet Chuck with D1+8 fitting

MK2 Hydraulic DType Collet Chuck with D1+8 fitting

CRAWFORD

Ref #: 0776
To suit Colchester Mascot or Harrison M400 etc

For use with D-Type (V120) Crawford Collets
£325.00 + VAT (ex. works)
Posted by westpoint at 16:12
Categories:

ETALON 0-16" Vernier Caliper

ETALON 0-16

ETALON 0-16" Vernier Caliper

Capacity 0"-16" 0-380mm

Ref #: HE188
Capacity: 0"-16" or 0-380mm
£60.00 + VAT (ex. works)
Posted by westpoint at 16:12
Categories:

EDWARDS Model 50x3 ES.R.

EDWARDS Model 50x3 ES.R.

EDWARDS Model 50x3 ES.R.

Initial Pinch Manual Bending Rolls

Ref #: 1659
Capacity: 50" x 3" Diameter Rolls
Capacity: 1270 x 76.2mm Diameter Rolls
£1,200.00 + VAT (ex. works)
Posted by westpoint at 16:11
Categories:

PINNACLE MODEL PKT 380 VA

PINNACLE MODEL PKT 380 VA

PINNACLE MODEL PKT 380 VA

Turret Milling Machine

Ref #: 2372
Table Size: 54" x 10"
X Traverse: 45" Approx.
Variable Spindle Speed.
Spindle Taper: R8
Power Feed to Table: Longitudinal.
Spindle Motor: 3 HP
2 Axis Newall DP7 Digital Readout.

Year of manufacture: 1997
Very Good Condition
£5,250.00 + VAT (ex. works)
Posted by westpoint at 16:11
Categories:

BROWN 250

BROWN 250

BROWN 250

Cut Off Saw

Ref #: 2247
Blade Diameter 250mm
Vice Max Open 3"
Year 2001
On Stand
£800.00 + VAT (ex. works)
Posted by westpoint at 16:11
Categories:

GEKA Hydracrop 110/S High Speed

GEKA Hydracrop 110/S High Speed

GEKA Hydracrop 110/S High Speed

Universal Hydraulic Iron Worker

Ref #: TBA
Capacity: 110 Ton
90° Angle: 152 x 152 x 13 mm
Cropping: 600 x 15 mm
Round & Square Section: 50 mm
Punching: 40 mm Ø through 20 mm

With Equipment & Tooling (See photo).

Year of manufacture: 1995
£13,750.00 + VAT (ex. works)
Posted by westpoint at 16:11
Categories:
Subscribe to: Posts (Atom)