Thursday 15 September 2011

AJAX Model AJT1

AJAX Model AJT1

AJAX Model AJT1

Turret Mill

Ref #: 2468
Table Size: 50" x 10"
X Travel: 28"
Y Travel: 14"

Metric Dials
Spindle Taper: 30 ISO
Spindle Speeds: 49-2440 rpm
Spindle Motor: 2.2 kW

Power Feed to Longitudinal
Power Feed to Spindle

Coolant & Light
£2,500.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

RICHMOND No 2

RICHMOND No 2

RICHMOND No 2

Universal Milling Machine

Ref #: 2458
Table: 40" x 9"
Spindle Capacity: 40 ISO
Spindle Speeds: 43-800 rpm

Comes with Swiveling Vertical Head & Machine Vice

Coolant
LoVo Light
£2,750.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

SUNNEN Model MBB-1800 H

SUNNEN Model MBB-1800 H

SUNNEN Model MBB-1800 H

Honing Machine

Ref #: 2420
Honing Diameter: 3 to 90 mm
Honing Length: 406 mm
£2,750.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

WADKIN Model RS1421

WADKIN Model RS1421

WADKIN Model RS1421

Gap Bed Wood Lathe

Ref #: 2452
Swing Over Bed: 16" Ø
Swing In Gap: 28" Ø
Distance Between Centres: 5' 6"
Spindle Speeds: 240/600/1250/2800 rpm

Travelling Saddle
Tool Rests
£1,750.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

SABI Model HR210

SABI Model HR210

SABI Model HR210

Power Hacksaw

Ref #: 2426
Capacity: 8" Diameter
Blade Length: 14"
Power Down Feed
Coolant
£650.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

HURON KU4

HURON KU4

HURON KU4

Universal Milling Machine

Ref #: 2430
Table Size: 56½" x 16" (1435 x 400 mm)
X Travel: 43¼" (table)
Y Travel: 27½" (head)
Z Travel: 19 11/16 ths " (vertical)
Spindle Taper: 40 ISO
Spindle Speeds: 30-2066 rpm
£7,950.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

STARTRITE Type 24-V-10

STARTRITE Type 24-V-10

STARTRITE Type 24-V-10

Vertical Bandsaw

Ref #: TBA37
Throat: 24"
Daylight: 10"
Motorsize: 1.1 kW

Comes with Blade Welder
£1,250.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

STARTRITE 30 RWS

STARTRITE 30 RWS

STARTRITE 30 RWS

Bandsaw

Ref #: TBA28
Throat: 30"
Daylight: 10"
Manual Table Traverse
Blade Welder
£1,950.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

MEDDINGS L2-FS-3PH

MEDDINGS L2-FS-3PH

MEDDINGS L2-FS-3PH

Pillar Drill

Ref #: TBA36
Capacity: 2 Morse Taper (½")
Spindle Speeds: 500 - 4000 rpm
Table Size: 10¾" x 10"

Emergency Kick Stop

Year 2000
£675.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

MEDDINGS MF4

MEDDINGS MF4

MEDDINGS MF4

Pillar Drill

Ref #: TBA38
Capacity: 2 Morse Taper (1/2")
Spindle Speeds (low gear): 80-1000 rpm
Spindle Speeds (high gear): 310-4000 rpm
Table Size: 10¾" x 10"
£1,250.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

FOBCO 10Eight

FOBCO 10Eight

FOBCO 10Eight

Pillar Drill

Ref #: TBA54
Table: 18" x 15"
Spindle: 3 Morse Taper (1")
Speeds: 51 to 2650 rpm
Throat: 10"
£1,650.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

MEDDINGS Type M7T

MEDDINGS Type M7T

MEDDINGS Type M7T

Heavy Duty Pillar Drill

Ref #: 1881
Spindle Taper: No.3 Morse
Capacity: 1¼ inch Diameter
Spindle Speeds: Variable (tba)
Table Size: 19" x 15"
Throat: 12"

With Reverse Tapping
£1,750.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

POLLARD Type 150A/6

POLLARD Type 150A/6

POLLARD Type 150A/6

Six Spindle In-Line Drill

Ref #: 2415
Spindle Taper: No.3 Morse Taper (All Six)
Drilling Capacity: 1 inch in Mild Steel
Spindle Speeds:
2 Spindles: 55 to 1210 rpm
2 Spindles: 86 to 1920 rpm
2 Spindles: 116 to 2580 rpm
Table size: 67¾" x 20½"
Throat: 13½"

All Spindles have Power Feed
2 Spindles have Reverse Tapping
£6,250.00 + VAT (ex. works)
Posted by westpoint at 15:04
Categories:

INVICTA 4 MR

INVICTA 4 MR

INVICTA 4 MR

Toolroom Shaping Machine

Ref #: 2459
Capacity: 14" Stroke
Strokes per minute: 11 to 101
Swivel Head
9¼" Wide Vice
£750.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

KEARNEY & TRECKER Model 415 TF Series No 4

KEARNEY & TRECKER Model 415 TF Series No 4

KEARNEY & TRECKER Model 415 TF Series No 4

15 HP Vertical Milling Machine

Ref #: 2418
Table Size: 92" x 15"
X Travel: 53"
Y Travel: 16"
Z Travel: 16"
Spindle Travel: 4"
Spindle Taper: 50 ISO
Spindle Speeds: 15-1500 rpm
Power Feed & Rapids to Table
Power Feed to Spindle
Spindle Motor: 15 HP
£6,950.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

WADKIN Model NQ 3125

WADKIN Model NQ 3125

WADKIN Model NQ 3125

Blade Grinding Machine

Ref #: 2450G
Max Grinding Length: 40" (approx).
Table Length: 36"
Diameter of Grinding Wheel: 6½"
Head Canting: 5° - 25°
Spindle Motor: 2 HP
£2,250.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

BIRLIK Model PBM 35

BIRLIK Model PBM 35

BIRLIK Model PBM 35

Profile Bending Machine

Ref #: 2472
Shaft Diameter: 50 mm
Roll Diameter: 155 mm
Turning Speed: 3.6 m/min

Capacities:
Tube: 70 mm Ø x 3 mm Wall
Solid Round: 35 mm
Angle: 50 x 50 x 5 mm
Flat: 80 mm x 20 mm

Motor: 1.5 kW

Year 2007
£2,750.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

HACO Type 3HBR 176A

HACO Type 3HBR 176A

HACO Type 3HBR 176A

3 Roll Double Pinch Bending Rolls

Ref #: 2471
Length of Rolls: 1750 mm
Bending Capacity: 6 mm
Pre-Bending Capacity: 4mm
Diameter of Rolls: 150 mm
Hardened Rolls: 50-55 HRC
Hydraulic Conical Bending
Hydraulic Drop End
Hydraulic Side Positioning Readouts
Hydraulic Overload Protection System
Wire Safety System

Year of manufacture: 2007
£16,750.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

KINGSLAND Type SST 3006

KINGSLAND Type SST 3006

KINGSLAND Type SST 3006

Hydraulic Guillotine

Ref #: 2090
Capacity: 3000 mm x 6 mm

Power Back Gauge
Squaring Arm & Front Supports

Year of manufacture: 1992
£9,250.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

EDWARDS PEARSON Type 6.5/3070 VR

EDWARDS PEARSON Type 6.5/3070 VR

EDWARDS PEARSON Type 6.5/3070 VR

Hydraulic Guillotine

Ref #: 2460
Capacity: 6.5 x 3000 mm
Cybelec DNC 10 Control
1.5 meter Square Arm & Supports
Programmable Back Gauge

Year of manufacture: 1995


Please Note;

This machine is on reserve until 21-09-11
£10,750.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

UNION BFT 63

UNION BFT 63

UNION BFT 63

Horizontal Borer

Ref #: 2285
Spindle: 63 mm
Table: 900 x 710 mm
X Traverse: 1410 mm
Y Traverse: 800 mm
Z Traverse: 700 mm

4 Morse Taper Spindle
Facing Head Diameter: 400 mm
Speeds: 4 to 1400

3 Axis Digital Read Out Millvision
£8,750.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

ELLIOT Model U2

ELLIOT Model U2

ELLIOT Model U2

Universal Milling Machine

Ref #: TBA49
Table Size: 45 x 11 ½"
X Travel: 32"
Y Tavel: 8"
Z Travel: 15"
Spindle Taper: 40 ISO
Spindle Speeds: 31-1010 RPM

Swivel Table
Swivel Vertical Head (40 ISO)
£1,750.00 + VAT (ex. works)
Posted by westpoint at 15:03
Categories:

Tuesday 6 September 2011

DRUMMOND 2A Maxicut

DRUMMOND 2A Maxicut

DRUMMOND 2A Maxicut

High Speed Rack Cutting Machine

Ref #: 2412
With Indexing
£9,950.00 + VAT (ex. works)
Posted by westpoint at 16:40
Categories:

DRUMMOND 2A Maxicut

DRUMMOND 2A Maxicut

DRUMMOND 2A Maxicut

High Speed Gear Shaper

Ref #: 2411
Capacity: External Spur Gear: 7" x 2" x 6 DP
Capacity: Internal Spur Gear: 5½" x 1" x 6 DP
Capacity: External Hetical Gear: 6½" x 2" x 6/8 DP
Maximum Module Pitch: 4
Maximum Helix Angle: 45°
Maximum Length of Cutter Spindle Stroke: 2"
Maximum Diameter of Cutter: 4"
Speed Strokes per Min: 160 to 550
Feed Strokes per Rev: 510 to 1620
£5,750.00 + VAT (ex. works)
Posted by westpoint at 16:40
Categories:

LIEBHERR Model L 300

LIEBHERR Model L 300

LIEBHERR Model L 300

Gear Hobbing Machine

Ref #: 2413
Table Size: 315 mm Ø
Module: 5
Cutter Size: 125 mm Ø
Cutter Length: 105 mm
£14,950.00 + VAT (ex. works)
Posted by westpoint at 16:39
Categories:

PARKSON No. 3 N

PARKSON No. 3 N

PARKSON No. 3 N

Universal Milling Machine

Ref #: 2425
Table Size: 60" x 14"
X Travel: 36"
Y Travel: 12"
Z Travel: 18"

Spindle Taper: 50 ISO
Spindle Speeds: 22 - 1330 rpm
Power Feeds & Rapids all round
Swivel Table
Swivel Vertical Head (50 ISO)
Horizontal Arbor & Supports
£4,750.00 + VAT (ex. works)
Posted by westpoint at 16:39
Categories:

WALTONS Model TSR/4/50P

WALTONS Model TSR/4/50P

WALTONS Model TSR/4/50P

Initial Pinch Power Rolls

Ref #: 2433
Capacity: 1270 x 2 mm (50")
Roll Diameter: 102 mm (4")

Top Slip Roll

Forward/Reverse Pedal
Foot Stop Kick Plate

Motor Size: 1.5 HP
£2,750.00 + VAT (ex. works)
Posted by westpoint at 16:39
Categories:

COLCHESTER Master MkII

COLCHESTER Master MkII

COLCHESTER Master MkII

Gap Bed Centre Lathe

Ref #: TBA
Swing over Bed: 12½" (315mm)
Swing over Cross Slide: 8" (203mm)
Swing in Gap: 18" (457mm)
Between Centres: 36" (900mm)
Spindle Bore: 1½" (38mm)
Spindle Speeds: 34 to 1500 rpm

Metric Conversion
Quick Change Tool Post
3 & 4 Jaw Chuck
Travel Steady
Coolant & Light
£2,750.00 + VAT (ex. works)
Posted by westpoint at 16:39
Categories:

ELEY & WARREN

ELEY & WARREN

ELEY & WARREN

Granite Table

Ref #: TBA
Size: 62" x 44"

Year 1985

Inserted with 30 threaded brushes
£700.00 + VAT (ex. works)
Posted by westpoint at 16:39
Categories:

GEKA Microcrop 45 Ton

GEKA Microcrop 45 Ton

GEKA Microcrop 45 Ton

Hydraulic Iron Worker

Ref #: TBA
Punching: 28 Ø x 10 mm
90° Angle: 80 x 80 x 8 mm
45° Angle: 50 x 50 x 6 mm
Shearing: 200 x 13 or 350 x 6 mm
Circle Section: 30 mm
Square Section: 25 mm
£2,950.00 + VAT (ex. works)
Posted by westpoint at 16:39
Categories:

KITCHEN & WALKER Type E3

KITCHEN & WALKER Type E3

KITCHEN & WALKER Type E3

6' Radial Arm Drill

Ref #: TBA
Spindle: 5 Morse Taper (3")
Speeds: 12-1000 rpm

Power Feed
Power Locking

Comes with
Box Table 57" x 36" x 20" high
DC Brake
£5,750.00 + VAT (ex. works)
Posted by westpoint at 16:38
Categories:

JONES & SHIPMAN Type 540M

JONES & SHIPMAN Type 540M

JONES & SHIPMAN Type 540M

Capacity: 18" x 6"

Ref #: TBA
Capacity: 18" x 6"
Metric Dials
£1,850.00 + VAT (ex. works)
Posted by westpoint at 16:38
Categories:

DUFOUR

DUFOUR

DUFOUR

Universal Milling Machine

Ref #: TBA
Spindle Taper: 40 ISO
Spindle Speeds: 21-1180 (Horizontal)
Spindle Speeds: 21-1600 (Vertical)
Table Size: 1100 x 250 mm
X Travel: 700 mm
Y Travel: 250 mm
Z Travel: 400 mm

Power Feed & Rapids to All Axis
Swivel Table
Double Swivel Vertical Head
Horizontal Arbor & Support
Coolant System
£3,950.00 + VAT (ex. works)
Posted by westpoint at 16:38
Categories:

LAPOINT MOdel FY2-202

LAPOINT MOdel FY2-202

LAPOINT MOdel FY2-202

Horizontal Broaching Machine

Ref #: 2416
Stroke: 30"
Approx 30 Spare Broaches
£3,950.00 + VAT (ex. works)
Posted by westpoint at 16:38
Categories:

HERBERT/DEVLIEG 2B-36

HERBERT/DEVLIEG 2B-36

HERBERT/DEVLIEG 2B-36

Spiramatic Precision Boring & Milling Machine

Ref #: 2409
Table Size: 36" x 24"
Longitudinal Travel: 36"
Vertical Travel: 24"
Spindle Travel: 12"
Spindle Taper: 40 ISO
Spindle Speeds: 42-2000 rpm
Spindle Diameter: 2½"
Table Work Load: 2500 lbs
Auto Table Retraction: 12"

Continuous Power Feed to Spindle
Power Tool Locking
Air Lift Indexing Table
Pair of Precision Angle Plates 18" x 15"
Lots of Tooling

3 Axis Digital Read Out
£14,950.00 + VAT (ex. works)
Posted by westpoint at 16:38
Categories:
Subscribe to: Posts (Atom)