WALTONS
Initial Pinch Bending Rolls
Ref #: TBA
Capacity: 1.6 mm
Length of Rolls: 50"
Diameter of Rolls: 3"
Initial Pinch
Bottom Slip Roll
Length of Rolls: 50"
Diameter of Rolls: 3"
Initial Pinch
Bottom Slip Roll
£975.00 + VAT (ex. works)
Wednesday 20 July 2011
12.1/2" x 10" x 10" Adjustable angle plate
12.1/2" x 10" x 10" Adjustable angle plate
Ref #: 0641
12.1/2" width
10" depth
10" height
Top plate when tilted: 12.1/2" x 8.7/8"
90 degrees on scale but does tilt further
10" depth
10" height
Top plate when tilted: 12.1/2" x 8.7/8"
90 degrees on scale but does tilt further
£180.00 + VAT (ex. works)
Grinding wheel balancer
Grinding wheel balancer
Ref #: 0640
Max. Capacity/ width: 4"
Max. diameter: 10"
2 x rear leveling bolts
Front fixed point/ foot
Max. diameter: 10"
2 x rear leveling bolts
Front fixed point/ foot
£115.00 + VAT (ex. works)
44mm x 74mm x 456mm Pair of parallels
44mm x 74mm x 456mm Pair of parallels
Ref #: 0639
44mm width
74mm height
456mm length
Sizes are approximate.
There are 2 marks on one side of one parallel shown in pictures.
74mm height
456mm length
Sizes are approximate.
There are 2 marks on one side of one parallel shown in pictures.
£140.00 + VAT (ex. works)
SA-1E Tapping attachment 2 morse taper
SA-1E Tapping attachment 2 morse taper
S.P.V
Ref #: 0638
13 x various size collets including morse taper collet
2 morse taper drive
Adjustable torque
Made in Sweden
SERIAL No: 38345
2 morse taper drive
Adjustable torque
Made in Sweden
SERIAL No: 38345
£245.00 + VAT (ex. works)
EMI-MEC Auto Sprint S
EMI-MEC Auto Sprint S
Plug Board Type Automatic Lathe
Ref #: 2261
Spindle Bore: 2" Diameter
Front, Rear & Double Top Slides
With Bar Feed.
Front, Rear & Double Top Slides
With Bar Feed.
£4,000.00 + VAT (ex. works)
COLCHESTER Mastiff 1400
COLCHESTER Mastiff 1400
Gap Bed Centre Lathe
Ref #: 2223
Swing over Bed: 21"
Swing in Gap: 32"
Swing over Cross Slide: 14½"
Between Centres: 120"
Spindle Bore: 3½"
Spindle Speeds: 18-1400 rpm
Imperial Dials & Leadscrew
Taper Turning Attachment
Quick Change Tool Post + Holders
Four Jaw Chuck
Fixed 3 Point Steady
Swing in Gap: 32"
Swing over Cross Slide: 14½"
Between Centres: 120"
Spindle Bore: 3½"
Spindle Speeds: 18-1400 rpm
Imperial Dials & Leadscrew
Taper Turning Attachment
Quick Change Tool Post + Holders
Four Jaw Chuck
Fixed 3 Point Steady
£8,250.00 + VAT (ex. works)
CURVATUBI
CURVATUBI
Tube Bending Machine
Ref #: 2289
With 3 Formers - 1" ,1¼" & 1½" Ooutside Diameters
£2,250.00 + VAT (ex. works)
MEDDINGS Type F14
MEDDINGS Type F14
Articulated Arm Pedestal Drill
Ref #: 2391
Spindle Taper: No.3 Morse
Capacity: 1 inch Diameter
Spindle Speeds: 80 to 1500 rpm
Table Size: 20" x 20"
Throat: 14"
Capacity: 1 inch Diameter
Spindle Speeds: 80 to 1500 rpm
Table Size: 20" x 20"
Throat: 14"
£1,450.00 + VAT (ex. works)
BRIDGEPORT + ANILAM
BRIDGEPORT + ANILAM
CNC Turret Mill
Ref #: 2395
Retrofitted with Anilam 3000 M 3 Axis Control.
Spindle Taper: R8
Spindle Speeds: 67 - 4600 rpm
Table Size: 42" x 9"
X Axis: 24" (Table)
Y Axis: 12" (Table)
Z Axis: 4" (Spindle)
Two Speed Motor: 1HP & 2HP
Coolant System
Year of manufacture: 1976
Retrofitted with CNC: After 2001
(Ex. University)
Spindle Taper: R8
Spindle Speeds: 67 - 4600 rpm
Table Size: 42" x 9"
X Axis: 24" (Table)
Y Axis: 12" (Table)
Z Axis: 4" (Spindle)
Two Speed Motor: 1HP & 2HP
Coolant System
Year of manufacture: 1976
Retrofitted with CNC: After 2001
(Ex. University)
£3,950.00 + VAT (ex. works)
SUNRISE Type 1W-45M
SUNRISE Type 1W-45M
Universal Hydraulic Iron Worker
Ref #: 2345
Punch:
22 mm Ø Through 15 mm
or 40 mm Ø Through 8 mm
Shearing:
350 x 8 mm
or 180 x 12 mm
45° Angle:
80 x 80 x 8 mm
or 50 x 50 x 6 mm
Bar Shearing:
Round: 25 mm
Square: 25 mm x 25 mm
22 mm Ø Through 15 mm
or 40 mm Ø Through 8 mm
Shearing:
350 x 8 mm
or 180 x 12 mm
45° Angle:
80 x 80 x 8 mm
or 50 x 50 x 6 mm
Bar Shearing:
Round: 25 mm
Square: 25 mm x 25 mm
£3,950.00 + VAT (ex. works)
COMACA
COMACA
Hydraulic Corner Notcher
Ref #: 2092
Capacity: 200 x 200 x 4 mm
£1,950.00 + VAT (ex. works)
FLUIDAIR Type RS 7
FLUIDAIR Type RS 7
Rotary Screw Air Compressor
Ref #: 2383
8 Bar
7.5 kW Motor
38.8 Cubic Feet/min
Logik 15 Electronic Controller
With 200 Ltr Air Receiver
Year 2006
7.5 kW Motor
38.8 Cubic Feet/min
Logik 15 Electronic Controller
With 200 Ltr Air Receiver
Year 2006
£2,250.00 + VAT (ex. works)
FIM Type Versa Press 15
FIM Type Versa Press 15
Horizontal Hydraulic Press
Ref #: 2398
Capacity: 15 Ton
Year of Manufacture: 1990
Year of Manufacture: 1990
£3,750.00 + VAT (ex. works)
MORGAN RUSHWORTH
MORGAN RUSHWORTH
12 Roll Straightening Rolls
Ref #: 2340
Front and Rear Rolls
47" x 4" Diameter
6 off Centre Rolls
47" x 3½" Diameter
47" x 4" Diameter
6 off Centre Rolls
47" x 3½" Diameter
£4,250.00 + VAT (ex. works)
HARRISON Type 12"
HARRISON Type 12"
Gap Bed Centre Lathe
Ref #: 2367
Swing over Bed: 11"
Between Centres: 24"
Swing in Gap: 18"
Spindle Speeds: 45 - 1000 rpm
Spindle Bore: 1⅜" (35mm)
(Ex. College)
Between Centres: 24"
Swing in Gap: 18"
Spindle Speeds: 45 - 1000 rpm
Spindle Bore: 1⅜" (35mm)
(Ex. College)
£1,750.00 + VAT (ex. works)
MEGAFORM
MEGAFORM
Hydraulic Upstroke Brake Press
Ref #: 2338
Capacity: 2500 mm x 65 Ton
Distance Between Frames: 2100 mm
Throat: 500 mm
Top & Bottom Tooling
New Light Guards
Distance Between Frames: 2100 mm
Throat: 500 mm
Top & Bottom Tooling
New Light Guards
£6,950.00 + VAT (ex. works)
SAHINLER Model PK30
SAHINLER Model PK30
Section Bending Machine
Ref #: 2387
Capacities:
Flat Bar: 80 x 15 mm - Min Ø: 350 mm
Edge: 50 x 10 mm - Min Ø: 400 mm
Section (Sq & Rd): 30 mm - Min Ø: 600 mm
45° Angle: 40 x 40 x 5 mm - Min Ø: 400 mm
Round Tube: 60 x 2 mm - Min Ø: 1000 mm
Square Tube: 40 x 40 x 3 mm - Min Ø: 1000 mm
⅜" Gas: Min Ø: 300 mm
1½" Gas: Min Ø: 400 mm
Year of Manufacture: 1998
Flat Bar: 80 x 15 mm - Min Ø: 350 mm
Edge: 50 x 10 mm - Min Ø: 400 mm
Section (Sq & Rd): 30 mm - Min Ø: 600 mm
45° Angle: 40 x 40 x 5 mm - Min Ø: 400 mm
Round Tube: 60 x 2 mm - Min Ø: 1000 mm
Square Tube: 40 x 40 x 3 mm - Min Ø: 1000 mm
⅜" Gas: Min Ø: 300 mm
1½" Gas: Min Ø: 400 mm
Year of Manufacture: 1998
£2,500.00 + VAT (ex. works)
COLCHESTER Mascot 1600
COLCHESTER Mascot 1600
Gap Bed Centre Lathe
Ref #: 2390
Swing Over Bed: 17"
Swing In Gap: 28"
Swing Over Cross Slide: 10½"
Distance Between Centres: 80"
Spindle Bore: 3" Diameter
Spindle Speeds: 20-1600 rpm
Imperial Leadscrew
Quick Change Toolpost & 3 Tool Holders
3 & 4 Jaw Chucks
Swing In Gap: 28"
Swing Over Cross Slide: 10½"
Distance Between Centres: 80"
Spindle Bore: 3" Diameter
Spindle Speeds: 20-1600 rpm
Imperial Leadscrew
Quick Change Toolpost & 3 Tool Holders
3 & 4 Jaw Chucks
£7,950.00 + VAT (ex. works)
KEETONA
KEETONA
HYDROFORM Type HUF
Ref #: 2339
Capacity (metric): 2032 mm x 5 mm
Capacity (imp): 80" x 3/16"
Capacity (imp): 80" x 3/16"
£4,950.00 + VAT (ex. works)
EXCEL
EXCEL
Automatic Horizontal Bandsaw
Ref #: 2074
Capacity: 260 mm (Round)
Roller Type Vice
Roller Type Vice
£2,950.00 + VAT (ex. works)
SUNNEN Type MBB-1800 H
SUNNEN Type MBB-1800 H
Automatic Horizontal Honing Machine
Ref #: 2105
tba
£1,600.00 + VAT (ex. works)
ALLDAY & Co
ALLDAY & Co
Blacksmiths Anvil on Original Stand
Ref #: 1480
Length of Anvil: 28"
Width of Anvil Top: 5"
With Hammer Box & Tooling.
Original Stands.
Width of Anvil Top: 5"
With Hammer Box & Tooling.
Original Stands.
£800.00 + VAT (ex. works)
WALTONS Model UTG 50-16
WALTONS Model UTG 50-16
Teadle Guillotine
Ref #: 1753
Capacity: 1270 mm x 16 swg
Squaring Arm & Front Support
Rack & Pinnion Back Gauge
Year of Manufacture: 2003
Squaring Arm & Front Support
Rack & Pinnion Back Gauge
Year of Manufacture: 2003
£1,250.00 + VAT (ex. works)
EMCO Maximat V10
EMCO Maximat V10
Bench Top Lathe
Ref #: 2024
Swing over Bed: 11"
Between Centres: 24"
Norton Gear Box
3 & 4 Jaw Chucks
Face Plate
Single Phase Electrics
Between Centres: 24"
Norton Gear Box
3 & 4 Jaw Chucks
Face Plate
Single Phase Electrics
£950.00 + VAT (ex. works)
300mm-400mm Adjustable external micrometer
300mm-400mm Adjustable external micrometer
MITUTOYO
Ref #: 0637
300mm-400mm Capacity
Accurate to 0.01mm
Accurate to 0.01mm
£200.00 + VAT (ex. works)
6"-12" Adjustable external micrometer
6"-12" Adjustable external micrometer
MOORE & WRIGHT
Ref #: 0636
6-12" Capacity
Made in England.
Made in England.
£170.00 + VAT (ex. works)
200mm rotary table with dividing
200mm rotary table with dividing
HOFMANN
Ref #: 0635
200mm Diameter
4 x T-slotts
Reversable dividing plate
Dividing range: 15 to 49 & 14 to 47
75mm Height.
Excellent condition.
Serial No: 774422
4 x T-slotts
Reversable dividing plate
Dividing range: 15 to 49 & 14 to 47
75mm Height.
Excellent condition.
Serial No: 774422
£280.00 + VAT (ex. works)
4" Machine vice
4" Machine vice
F.BELL & SON
Ref #: 0634
4" Jaws
4" Capacity
1.1/2" Depth
4" Capacity
1.1/2" Depth
£140.00 + VAT (ex. works)
Type E94 Multibore collet square
Type E94 Multibore collet square
CRAWFORD
Ref #: 0632
Capacity: 1"-1.1/8"
25.40mm-28.57mm
Square
25.40mm-28.57mm
Square
£105.00 + VAT (ex. works)
Type E19 multibore collet
Type E19 multibore collet
CRAWFORD
Ref #: 0629
Capacity: 2.1/4"-2.3/8"
57.15mm-60.32mm
57.15mm-60.32mm
£95.00 + VAT (ex. works)
Type E17 multibore collet
Type E17 multibore collet
CRAWFORD
Ref #: 0627
Capacity: 2"-2.1/8"
50.80-53.97mm
50.80-53.97mm
£95.00 + VAT (ex. works)
Type E13 multibore collet HD
Type E13 multibore collet HD
CRAWFORD
Ref #: 0624
Capacity: 1.1/2"-1.5/8"
38.10mm-41.27mm
Heavy Duty.
38.10mm-41.27mm
Heavy Duty.
£105.00 + VAT (ex. works)
Type E12 multibore collet
Type E12 multibore collet
CRAWFORD
Ref #: 0623
Capacity: 1.3/8"-1.1/2"
34.92mm-38.10mm
34.92mm-38.10mm
£95.00 + VAT (ex. works)
Type E10 multibore collet
Type E10 multibore collet
CRAWFORD
Ref #: 0621
Capacity: 1.1/8"-1.1/4"
28.57mm-31.75mm
28.57mm-31.75mm
£95.00 + VAT (ex. works)
Type E9 multibore collet
Type E9 multibore collet
CRAWFORD
Ref #: 0620
Capacity: 1"-11/8"
25.40mm-28.57mm
25.40mm-28.57mm
£95.00 + VAT (ex. works)
Subscribe to:
Posts (Atom)